Technical specification
| Lubricant |
Regular relubrication – grease
|
| Design (sliding contact surface combination) |
Steel/steel
|
| Sealing solution |
No seals
|
DIMENSIONS
| d |
17 mm
|
Bore diameter |
|---|---|---|
| D |
30 mm
|
Outside diameter |
| B |
14 mm
|
Nominal width |
| C |
10 mm
|
Width outer ring |
| α |
10 °
|
Angle of tilt |
| dk |
25 mm
|
Raceway diameter inner ring |
| b |
2.3 mm
|
Width annular lubrication groove at outer ring |
| b1 |
2.4 mm
|
Width annular lubrication groove at inner ring |
| M |
1.5 mm
|
Diameter lubrication hole (outer ring) |
| r1 |
min. 0.3 mm
|
Chamfer dimension bore |
| r2 |
min. 0.3 mm
|
Chamfer dimension outer ring |
ABUTMENT DIMENSIONS
| da |
min. 19 mm
|
Abutment diameter shaft |
|---|---|---|
| da |
max. 20.7 mm
|
Abutment diameter shaft |
| Da |
min. 23.7 mm
|
Abutment diameter housing |
| Da |
max. 28.3 mm
|
Abutment diameter housing |
| ra |
max. 0.3 mm
|
Fillet radius shaft |
| rb |
max. 0.3 mm
|
Fillet radius housing |
CALCULATION DATA
| Basic dynamic load rating | C |
21.2 kN
|
|---|---|---|
| Basic static load rating | C0 |
106 kN
|
| Specific dynamic load factor | K |
100 N/mm²
|
| Specific static load factor | K0 |
500 N/mm²
|
| Material constant | KM |
330
|
MASS
| Mass plain bearing |
0.05 kg
|
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.